Multi Heads Automatic Screw Locking Machine

Multi Heads Automatic Screw Driving Machine:

Automatic screw driving machine configure the manipulator and the turntable to realize the feeding, detection, screwing and synchronous operation of the product, automatic completion by the equipment.
Many electric screwdrivers work at the same time, which can replace number of workers. The number of electric screwdrivers can be customized according to customer's request.

1.Machine Parameter:

Power Supply	220V/50Hz
Power	3000W
Air Pressure	0.4-0.6Mpa
Man-machine interface	Automatic Touch Screen
Control Mode	PLC
Lock up and down adjustment range	100mm
Applicable product range	100*100*100mm (Can be customized according to the range of products)
Screw locking depth	20mm
Minimum screw hole distance	20mm

2. Machine Feature:

1) By indexing turntable for fixture cycles stepping into the product line, machine assembly, testing, feeding screw, screw, automatic unloading work synchronously, greatly improve the efficiency of the machine.
2) Efficiency 1200pcs product /hour or higher, can be tightened at the same time a number of screws,

can send up to 12 screws most, can replace a number of workers.

3) For the screw hole distance smaller products, can be divided into two stations screw, make up for the lack of automatic screw
4) Other properties and multi head automatic locking screw machine the same

As shown below, the machine can increase the configuration, the machine more efficient, more secure.

About Automatic Screwing Machine

Machine Parameter: Machine structure Enlarged edition(8-16screwdrivers) 900x1300x1700 380KG Standard Edition(5-12 screwdrivers) 700x1200x1700 320KG Compact Edition(4-8 screwdrivers) 600x1000x1700 240KG Desk type(Less than 4 screwdrivers) 450x1000x1100 110KG Power Supply AC 220V 50HZ power 0.5KW Gas source >0.5KG/CM2 Gas consumption 25M3/hour Lock up and down adjustment range 200mm Control specification Host program control NC Control Interface Display and adjust parameters Screw feeder Automatic screw feeder In accordance with the number of screws to choose Request signal DC24V pulse,can communicate with PLC or host processor Send the feedback signal To host processing or PLC Screwdriver Screwdriver Multiple pcs, torqu:2-12kgf.cm,The special needs another choose Screw clamp Screw clamp Multiple sets,according to the quantity of screws Connect Universal joint drive shaft assembly Multiple sets,work with screw clamp Processing range (Range of screw on product) Enlarged edition( 8-16 screwdrivers) 600x500x150mm(Range of screw on product) Standard Edition(4-12 screwdrivers) 420x300x150mm(Range of screw on product) Compact Edition(4-8 screwdrivers) 320x250x150mm(Range of screw on product) Desk type(Less than 4 screwdrivers) 250x180x100mm(Range of screw on product) Horizontal adjustment range Small adjustment:±25mm,replaceable position adjustment to:±100mm Vertical adjustment range ±5mm,Replacement parts can be achieved ±15mm Screw locking depth 20mm,if you want a deeper need customized Minimum screw pitch 20mm,maximum hole distance unlimited Test items Screwdriver torque test Yes screwloos,slippery detection Yes Screw leakage lock detection Yes Screw leakage send detection Yes Handling of defective products Alarm, touch screen display defective product location Versatility of multi head automatic locking screw machine Multi head automatic locking screw machine with high efficiency, simple operation and maintenance, high cost, such as bad screws can automatically identify and alarm, and the screw claw adjustable spacing in the X--Y--Z direction, replace the product easy, good versatility. 1.The number of screws on the product can be reduced to a general purpose machine (just operate the display screen to shield the redundant power supply and nail delivery pipeline) 2.If the length of the screw (L1) is different, but the size (d) unchanged, the machine can be generic, just adjust the position of the claw can be. 3.If the size of the screw (d), the replacement of automatic nail feeding machine screw claw can be used (quick plug, automatic nail feeding machine replaced a communication cable plug screw claw fixed with screw connection, convenient disassembly and assembly). 4.Screw size should satisfy formula L>1.3D, otherwise it will flip screw in the pipeline (see photo shows the automatic nail feeding machine). 5.The minimum distance between the screw holes should be not less than 25mm (see photo).

3. About us:

Dongguan Rener Automation Technology Co., Ltd. is a high-tech enterprise engaged in R & D, industrial non-standard machinery and equipment production, sales and service automation.Our products are widely used in automatic production of standard fasteners, hardware accessories, auto parts, electronic parts, electrical appliances, plastic hardware, locks, medical equipment accessories, cosmetics, sanitary products and other industries. Undertake mobile phone connector, automotive, medical, hardware, wire, all kinds of consumer electronic products, sanitary products and other non-standard automation equipment R & D project development, to undertake a variety of plastic hardware products production line, assembly line, automatic machine manufacturing, design various automation solutions.Effective for the enterprises to solve the problems in high cost, low efficiency and serious quality, recruitment difficulties, labor trouble etc...For all enterprises to save resources, improve efficiency, achieve social harmony and win-win and customer.

Our main products: plastic & Hardware assembling machine, sanitary assembly machine, automatic locking screw machine, spring separating feeder machine, we developed a number of sanitary assembly line has been successfully put into production in the Middle East.

We have experienced technical backbone and a strong engineering team, and provide overseas machine commissioning and overseas training experience and service, make the enterprise production line put into production, we provide technical support and thoughtful pre-sale customer service for customers in the industry field, we will make unremitting efforts to strive for the majority of customer service. Dongguan Rener automation technology limited company's good faith, strength and quality of products recognized by the industry. Welcome friends from all world of life come to visit, guidance and business negotiation

4. Customer Service:
1) Warranty period:1 years (Non-human damage and other factors)
2) Provide logistics, customs service and foreign installation ,commissioning and operator training service for the machine.

After services:
FAQ

1. How long will your engineer reach our factory?
Within one week after machine arrival your factory.

2. How many days will you finish installing & commissioning ?

We will finish installation,commissioning and training within 15-25days.

3. What should we charge for your engineer?

You should charge for the cost of our engineer's visa, air tickets, hotel, food, and also their salary 50USD one day per person.

4. How long is your machine's warranty period?

All our machine have one year guarantee, starting from finished installation.

5. How could we do after one year warranty period?

We also can do service for you, but you need pay salary for my technician 80USD/day.

6. How could we do if the parts broken within warranty?

We would express the free replacement parts during the warranty date.

7. Does your engineer understand English?

Our engineers understand a little English. All of our engineer have more than five years machine installation experience. In addition, they can use body language to communicate with customer.

Pls Note:

Contact us if you need more details on Automatic Screw Locking Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Electric Screwdriver、Screw Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Automatic Screw Machine > Automatic locking Screw Machine